Slik Pro CF-634 Carbon Fibre Tripod without Head 6156051 | C.R. Kennedy

Slik Pro CF-634 Carbon Fibre Tripod without Head

Slik Pro CF-634 Carbon Fibre Tripod without Head

$316.25
  NO STOCK
  NO STOCK
PRODUCT ENQUIRY
  • Load Capacity: approx. 3kg
  • Max Height: 159cm , Min Height: 10.5cm
  • Folded Length: 47.5cm
  • Leg Sections: 4, Weight: 930g
  • Brand: Slik   |    Code: 6156051
    APN: 4906752156056   |    Supplier Code:

    Head mounting screw

    Corresponding to both U1/4 and U3/8 head mounting screws.

    3-steps leg angle adjustment

    Leg angle adjustable from a high position to a low position.

    A.R.S (Anti-Rotation System)

    The A.R.S. systems prevent the leg tubes from rotating inside each other making it much easier to lock and release all the twist-release locks securely.

    Leg lock system (crown-type) (PAT.)

    Twist lock system with double nut ring crown type (PAT.).

    The hook at the bottom of the center column

    Spring loaded accessory hook capable of suspending a weight.

    A very compact carbon fiber tripod, the Slik PRO CF-634 is for those who don’t need a full sized tripod but want something to hold there camera still in a wide variety of situations. The SLIK PRO CF-634 is extremely lightweight. It has four short leg sections extending to nearly 1.6m and folding down to 45cm for carrying and storage. Most noteworthy, the SLIK PRO CF-634 weighs only 930g, but supports loads up to 3kgs., making it a great choice for travel. Use it in situations where a full-sized tripod would not be needed or convenient to carry.

    All 600 series carbon fiber tripods have legs made up of carbon fiber material that is actually comprised of 8 layers of inter-woven carbon strands that are then bonded together in a sealed, high-pressure furnace producing strong, light weight carbon fiber. The legs also feature A.R.S (Anti-Rotational System) is designed into the leg locks and do not allow the individual legs sections to rotate inside each other. Each leg also has an independent lock that sets in one 3 angles to vary the height and stance of the tripod. The three setting are for maximum height, waist level or low angle photography close to the ground.

    The four leg sections are secured and loosened with twist locks. Because the legs are non-rotating, you can unlock all of a leg’s stages at once by twisting the three large rubber grips with one hand. This enables fast setup.

    Folded Length: 475mm
    Maximum Operating Height: 1,590mm
    Minimum Operating Height: 105mm
    Maximum Center Column Ext.: 280mm
    Weight: 930g
    Head Portion Weight:
    Leg Portion Weight: 930g
    Leg Lock Type: Twist Lock
    Leg Tip: Rubber
    How To Mount Camera:
    Number of Leg Sections: 4
    Shape of Leg Pipe/Tube:
    Diameter of the first upper leg: 22mm
    Type of Center Column Elevation: Center column type
    Panhead:
    Type of Bubble Level:
    Special Features: Multi-position leg
    Slik Pro CF-634 Tripod (Black)
    This product has yet to be reviewed

    To be the first to review this product simply fill out the form to the left and let us know how you feel about this product!


    To estimate the freight on this item simply enter the destination postcode and the desired quantity and click the "estimate" button.

    OVERVIEW

    A very compact carbon fiber tripod, the Slik PRO CF-634 is for those who don’t need a full sized tripod but want something to hold there camera still in a wide variety of situations. The SLIK PRO CF-634 is extremely lightweight. It has four short leg sections extending to nearly 1.6m and folding down to 45cm for carrying and storage. Most noteworthy, the SLIK PRO CF-634 weighs only 930g, but supports loads up to 3kgs., making it a great choice for travel. Use it in situations where a full-sized tripod would not be needed or convenient to carry.

    All 600 series carbon fiber tripods have legs made up of carbon fiber material that is actually comprised of 8 layers of inter-woven carbon strands that are then bonded together in a sealed, high-pressure furnace producing strong, light weight carbon fiber. The legs also feature A.R.S (Anti-Rotational System) is designed into the leg locks and do not allow the individual legs sections to rotate inside each other. Each leg also has an independent lock that sets in one 3 angles to vary the height and stance of the tripod. The three setting are for maximum height, waist level or low angle photography close to the ground.

    The four leg sections are secured and loosened with twist locks. Because the legs are non-rotating, you can unlock all of a leg’s stages at once by twisting the three large rubber grips with one hand. This enables fast setup.

    FEATURES

    Head mounting screw

    Corresponding to both U1/4 and U3/8 head mounting screws.

    3-steps leg angle adjustment

    Leg angle adjustable from a high position to a low position.

    A.R.S (Anti-Rotation System)

    The A.R.S. systems prevent the leg tubes from rotating inside each other making it much easier to lock and release all the twist-release locks securely.

    Leg lock system (crown-type) (PAT.)

    Twist lock system with double nut ring crown type (PAT.).

    The hook at the bottom of the center column

    Spring loaded accessory hook capable of suspending a weight.

    SPECIFICATIONS

    Folded Length: 475mm
    Maximum Operating Height: 1,590mm
    Minimum Operating Height: 105mm
    Maximum Center Column Ext.: 280mm
    Weight: 930g
    Head Portion Weight:
    Leg Portion Weight: 930g
    Leg Lock Type: Twist Lock
    Leg Tip: Rubber
    How To Mount Camera:
    Number of Leg Sections: 4
    Shape of Leg Pipe/Tube:
    Diameter of the first upper leg: 22mm
    Type of Center Column Elevation: Center column type
    Panhead:
    Type of Bubble Level:
    Special Features: Multi-position leg

    IN THE BOX

    Slik Pro CF-634 Tripod (Black)